Section: Maintenance Commands (8)
Updated: Jan, 2010
Return to Main Contents
- Firewall Snort
translates SNORT rules into iptables rules and generates a
shell script that implements the resulting iptables commands.
This ruleset allows network traffic that matches Snort signatures (i.e.
attacks and other suspicious network behavior) to
be logged and/or dropped by iptables directly without putting an interface
into promiscuous mode or queuing packets from kernel to user space. Note
that fwsnort can also build an iptables policy that combines the string
match extension with the NFQUEUE or QUEUE targets to allow the kernel to
perform preliminary string matches that are defined within Snort rules
before queuing matching packets to userspace. Because the bulk of
network communications are not malicious, this should provide a speedup
for snort_inline since the majority of packets do not then have to be
copied from kernel memory into user memory and subsequently inspected by
snort_inline. There is a tradeoff here in terms of signature detection
however because snort_inline when deployed in this way does not have the
opportunity to see all packets associated with a session, so stream
reassembly and signature comparisons against a reassembled buffer do not
take place (the stream preprocessor - stream4, stream5, etc. - should be
(optionally) uses the IPTables::Parse module to parse
the iptables ruleset on the machine to determine which Snort rules are
applicable to the specific iptables policy. After all, if iptables is
blocking all inbound http traffic from external addresses, it is probably
not of much use to try detecting inbound attacks against against tcp/80.
By default fwsnort generates iptables rules that log Snort sid's within
a --log-prefix to syslog where the messages can be analyzed with a log
analyzer such as
relies on the iptables string match module to match Snort content fields
in the application portion of ip traffic. Since Snort rules can contain
hex data in content fields (specified between pipe "|" characters), fwsnort
implements a patch against iptables (which has been accepted by the Netfilter
project as of iptables-1.2.7a) which adds a "--hex-string" option. This
allow iptables to accept content fields from Snort rules such as
"|0d0a5b52504c5d3030320d0a|" without any modification.
is able to translate approximately 60% of all rules from the Snort-2.3.3
IDS into equivalent iptables rules. For more information about the
translation strategy as well as advantages/disadvantages of the method
used by fwsnort to obtain intrusion detection data, see the README
included with the fwsnort sources or browse to:
- -c, --config <configuration file>
By default fwsnort makes use of the configuration file
for almost all configuration parameters. fwsnort can be made to
override this path by specifying a different file on the command
line with the --config option.
Download the latest Emerging Threats rules from http://www.emergingthreats.net
This will overwrite the emerging-all.rules file in the
/etc/fwsnort/snort_rules/ directory. Note that the automatic downloading
of Snort rules from http://www.snort.org/ as of March, 2005 is only offered
as a pay service.
- -6, --ip6tables
mode so that the fwsnort rule set is built into an ip6tables policy instead
of the iptables policy. This allows fwsnort controls to apply to IPv6
- --include-type <rules type>
Restrict to processing snort rules of <rules type>. Example rule
types would include "ddos", "backdoor", and "web-attacks". This option
also supports a comma-separated list of types, e.g. "ddos,backdoor".
- --exclude-type <rules type>
Exclude all Snort rules from of type <rules type> from the translation
process. For example, if you don't want any rules from the file
emerging-all.rules to be translated, then use "emerging-all" as the
argument to this option. A comma-separated list of types to exclude can
- --include-regex <regex>
Only translate Snort rules that match the specified regular expression. This
is useful to build
policies for Snort rules that have a common characteristic (such as a string
match on the word "Storm" for the Storm worm for example).
- --exclude-regex <regex>
Translate all Snort rules except those that match the specified regular
expression. This is useful to omit Snort rules from
policies that have a common characteristic (such as a string
match on "HTTP_PORTS" for example).
Make the rule matchine regular expression specified with
match case insensitively.
Make the rule matchine regular expression specified with
match case insensitively.
- --snort-rdir <snort-rules-directory>
Manually specify the directory where the snort rules files are located.
The default is
Multiple directories are supported as a comma-separated list.
- --snort-rfile <snort-rules-file>
Manually specify a Snort rules file to translated into iptables rules.
Multiple files are also supported as a comma-separated list.
- --snort-sid <sid>
Generate an iptables ruleset for a single snort rule specified by
<sid>. A comma-separated list of sids can be specified, e.g. "2001842,1834".
- --exclude-sid <sid>
Provide a list of Snort ID's to be excluded from the translation process.
'perl -e print ...'
commands as comments in the
script. These commands allow payloads that are designed to trigger snort
rules to easily be built, and when combined with netcat (or other software
that can send bytes over the wire) it becomes possible to test whether an
fwsnort policy appropriately triggers on matching traffic.
- --ipt-script <script file>
Specify the path to the iptables script generated by fwsnort. The
default location is /etc/fwsnort/fwsnort.sh.
with the same command line arguments as the previous execution. This is a
convenient way of rebuilding the
script without having to remember what the last command line args were.
policy that sends packets that match Snort
fields to userspace via the iptables NFQUEUE target for further analysis. This is a
mechanism for reducing the signature inspection load placed on snort_inline.
A parallel set of Snort rules that are successfully translated are placed in
the /etc/fwsnort/snort_rules_queue directory. This requires
CONFIG_NETFILTER_XT_TARGET_NFQUEUE support in the Linux kernel.
Same as the
command line argument except that the older QUEUE target is used instead of
the NFQUEUE target. This requires CONFIG_IP_NF_QUEUE support in the Linux kernel.
- --queue-num <num>
Specify a queue number in --NFQUEUE mode.
Execute the iptables script generated by fwsnort.
currently active iptables rules (flushes the fwsnort chains).
currently active iptables rules (lists the fwsnort chains).
For each logging rule generated by
add a corresponding DROP
rule. Note that for TCP sessions using this option will cause retransmissions
as packets that are part of established sessions selectively dropped.
Remember that false positives are common occurrences for intrusion detection
systems, and so using this or the --ipt-reject option may break things on
your network! You have been warned.
For each logging rule generated by
add a corresponding REJECT rule.
Reset packets will be generated for TCP sessions through the use of
the "--reject-with tcp-reset" option, and ICMP port unreachable messages will
be generated for UDP packets through the use of the
"--reject-with icmp-port-unreachable" option.
By default fwsnort generates an iptables script that implements a logging
rule for each successfully translated snort rule. This can be disabled
with the --no-ipt-log option, but --ipt-drop must also be specified.
Do not consult the iptables policy currently running on the machine
for applicable snort rules. Unless limited with the --include-type or --snort-sid
options this can result in a fwsnort.sh script that contains several
thousand iptables rules.
Do not test the iptables build for existence of support for the LOG and
REJECT targets, and ascii and hex string matching.
Do not jump packets from the built-in iptables INPUT, OUTPUT, and
FORWARD chains to the custom
chains. This options is mostly useful to make it
easy to manually alter the placement of the jump rules in the iptables
includes the rule number within the logging prefix for each of the rules it
adds to the fwsnort chains. E.g. the logging prefix for rule 34 would look
something like " SID1242 ESTAB". Use this option to not include the
If the iptables "comment" match exists, then
puts the Snort "msg", "classtype", "reference", "priority", and "rev" fields
within a comment for each iptables rule. Use this option to disable this.
Do not jump packets from the iptables INPUT chain to the
Do not jump packets from the iptables OUTPUT chain to the
Do not jump packets from the iptables FORWARD chain to the
- -H, --Home-net <network/mask>
Specify the internal network instead of having
derive it from the HOME_NET keyword in the fwsnort.conf configuration
- -E, --External-net <network/mask>
Specify the external network instead of having
derive it from the EXTERNAL_NET keyword in the fwsnort.conf configuration
Disable all checks against the output of ifconfig for proper IP addresses.
This is useful if
is running on a bridging firewall.
Print the fwsnort configuration on STDOUT and exit.
Run in debug mode. This will cause all parse errors which are normally
written to the fwsnort logfile
to be written to STDOUT instead.
Run fwsnort in "strict" mode. This will prevent fwsnort from translating
snort rules that contain the keywords "offset", "uricontent", and "depth".
- -U, --Ulog
Force the usage of the ULOG target for all log messages instead of the
default LOG target.
Specify the netlink group for ULOG rules. Such rules are only added for
Snort rules that have an action of "log", or when
is run in
- -l, --logfile <logfile>
By default fwsnort logs all parse errors to the logfile
This path can be manually changed with the --logfile option.
- -v, --verbose
Run fwsnort in verbose mode. This will cause fwsnort to add the original
snort rule as a comment to the fwsnort.sh script for each successfully
- -V, --Version
Print the fwsnort version and exit.
- -h, --help
Print usage information on STDOUT and exit.
The fwsnort configuration file. The path to this file can be
changed on the command line with --config.
The iptables script generated by fwsnort. The path can be manually
specified on the command line with the --ipt-script option.
FWSNORT CONFIGURATION VARIABLES
This section describes what each of the more important fwsnort configuration
variables do and how they can be tuned to meet your needs. These variables
are located in the fwsnort configuration file
uses the same HOME_NET and EXTERNAL_NET variables as defined in Snort rules,
and the same semantics are supported. I.e., individual IP addresses or networks
in standard dotted-quad or CIDR notation can be specified, and comma separated
lists are also supported.
Defines the external network. See the HOME_NET variable for more information.
The following examples illustrate the command line arguments that could
be supplied to fwsnort in a few situations:
Script generation in logging mode, parse errors written to the fwsnort
logfile, and iptables policy checking are enabled by default without
having to specify any command line arguments:
Generate ip6tables rules for attacks delivered over IPv6:
# fwsnort -6
Generate iptables rules for ddos and backdoor Snort rules only:
# fwsnort --include-type ddos,backdoor
Generate iptables rules for Snort ID's 2008475 and 2003268 (from emerging-all.rules):
fwsnort --snort-sid 2008475,2003268
Generate iptables rules for Snort ID's 1834 and 2001842 but queue them to userspace
via the NFQUEUE target and restrict exclude the INPUT and OUTPUT chains:
fwsnort --snort-sid 1834,2001842 --NFQUEUE --no-ipt-INPUT --no-ipt-OUTPUT
to only inspect traffic that traverses the eth0 and eth1 interfaces:
# fwsnort --restrict-intf eth0,eth1
Generate iptables rules for all Snort rules, and write original
snort rule to the iptables script as a comment:
# fwsnort --no-ipt-sync --verbose
requires that the iptables string match module be compiled into the
kernel (or as a loadable kernel module) in order to be able to match
snort signatures that make use of the "content" keyword. Note that
the --no-opt-test option can be specified to have fwsnort generate an
iptables script even if the string match module is not compiled in.
also requires the IPTables::Parse module in order to parse
The --debug option can be used to display on STDOUT any errors that
are generated as fwsnort parses each snort rule. Normally these
errors are written to the fwsnort logfile /var/log/fwsnort.log
Michael Rash <email@example.com>
Many people who are active in the open source community have contributed to fwsnort;
file in the fwsnort sources, or visit
to view the online list of contributors.
is based on the original
script written by William Stearns.
Send bug reports to firstname.lastname@example.org. Suggestions and/or comments are
always welcome as well.
is distributed under the GNU General Public License (GPL), and the latest
version may be downloaded from
Snort is a registered trademark of Sourcefire, Inc.
- FWSNORT CONFIGURATION VARIABLES
- SEE ALSO
This document was created by
using the manual pages.
Time: 01:55:14 GMT, January 06, 2010